Model #K-902 YAMAHA Tape Deck

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Elite Dishwasher not doing anything during the "washing" cycle 66513193K902 Kenmore Elite Dishwasher 66513193K902 Kenmore Elite Dishwasher

A:

I just replaced the control board and it did nothing to help

Read More
FRANK -
November 07, 2015
Q:

Buttons temperamental 66513483K902 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 66513483K902: based on the description provided, it sounds like the electronic control board may need to be replaced. The electronic control board governs the functions of this unit so when it fails it can cause the controls to become unresponsive. I have posted a link of the electronic control board#10 on the diagram linked. To view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 06, 2015
A:

Well, I tried ur suggestion. I paid $150 for the electronic control board. Installed, still nothing. Then another "expert" suggested it was the touch pad control panel. I paid $141 for part and installed. It actually powered up and I ran a light wash. Then somewhere in the mid wash cycle, the dishwasher stopped working. All lights went off. The dishwasher was full of dirty water. Tested circuit, fine. Back to square one. And out 300 bucks to add insult to injury. Thanks Kenmore, my reliable friend...

Read More
slapshot6 -
October 27, 2015
See more answers
Q:

Kenmore Elite Dishwasher not doing anything during the "washing" cycle 66513193K902 Kenmore Elite Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 66513193K902: you can reset the unit by unplugging the dishwasher power cord for 5 minutes and then reapplying the power. If the problem persists then the electronic control board may need to be replaced. The electronic control board governs the functions of the unit, so when it fails it can cause the controls to become unresponsive when trying to start the cycle. I have posted a link of the electronic control board to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 05, 2015
A:

I am having this same problem with mine. What was your problem?

Read More
FRANK -
October 18, 2015
See more answers