Model #JVM1650SH05 GE Microwave/Hood Combo

  • Microwave
    3 Results
Find part by diagram >

Question and Answers

Q:

I have microwave oven model JVM1650SH05 can't set up. JVM1650SH05 Ge Microwave

A:

Thanks for using SearsPartsDirect.com

I am sorry, but we do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage, and a microwave shielding leakage test must be performed using a survey meter after any microwave service. That's why I strongly warn you to have this repair handled only by a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME.
Normally at ManageMyLife.com we like to help you with all of your repairs, but our expert advice is that microwaves are just too dangerous.

Thanks for using SearsPartsDirect.com

Read More
Samantha A -
Sears Technician
April 21, 2014
Q:

How do I remove the control panel (touch keys)? JVM1650SH05 Ge Microwave

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when you have to do repair work on the microwave.

Glad to help out.   Im  looking at your GE model number jvm1650sh05.

 I can appreciate wanting to diagnose and repair the microwave yourself, however I strongly recommend against it. We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.

Sorry but on Microwaves we have to refer you to our Sears Service Technicians at 1-800-469-4663.

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com


Read More
Larry L -
Sears Technician
October 23, 2013
A:

Although I can understand your desire to protect the user and/or generate work for Sears technicians, there are some repairs that are not in the rocket science category and will not affect the microwave enclosure (in the radiation sense) at all. Touch pad/control panel replacement is one of them. So for others that also need to know this answer, here it is: . unplug the microwave . look at the long plastic grille that's just above the door and goes from one side to the other. About 1/3 of the length from each end, and on the horizintal centerline, there are two Phillips head screws (quite long). Remove them. . pull off the grille . you now have access to a single Phillips head screw that retains the touch panel, at the center of the top edge of the assembly. Remove the screw. . slide the touch panel assembly up and then pull the bottom edge outwards . disconnect the cables from the old touch pad assembly and reconnect to the new touch pad assembly . replace the touch pad screw and the grille and plug the microwave back in. Pretty easy!!

Read More
avizulis -
October 23, 2013
A:

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 
I truly understand  your side.   These Microwaves are dangerous plugged or unplugged.   We are sorry to say in that on Microwaves the only thing I can help with is to get part numbers for things like the lights, the cooking tray, and the filters.   I would love to help you out but sorry to say that I cannot do it with the problems that  could arise.
 
 If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
October 24, 2013
See more answers
Q:

My microwave stopped heating, is there something I can check before replacing? JVM1650SH05 Ge Microwave

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
July 23, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when having trouble with the microwave.

I can appreciate wanting to diagnose and repair the microwave yourself, however I strongly recommend against it. We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.

For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME(1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project.

Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future. Thank you for choosing Sears.

 

 

 

Read More
Larry L -
Sears Technician
July 23, 2013
See more answers

Top Parts