Model #JVM1350WW02 GE Microwave/Hood Combo

  • Case, Door & Controls
    3 Results
  • Base, Stirrer & Electronics
    3 Results
Find part by diagram >

Question and Answers


GE Microwave: JVM1350WW02 with a broken door handle (Part 1801) - the plastic pin that holds the bottom is broken. Need ionstructions for replacing.


Having a Microwave is awesome, If your in a hurry you can pop in a quick meal in one minute but when you have to replace a part it can get a little disappointing. I researched your model number at Sears Parts Direct website and found the diagram on your Microwave. I attached the link below. Hope this helps!

Read More
Dezeray S -
November 15, 2010

The door would have to be completely disassembled to access the screws that secure the handle to the front of the door. This would involve removing the choke that is a shielding component. I recommend that you have a service technician complete this type of repair. A microwave radiation leakage test should be performed on the microwave door using proper testing equipment following this type of repair. That is why I recommend that you have a service technician replace the handle. I provided a link for the Sears Service website below.

Read More
Lyle W -
Sears Technician
November 17, 2010
See more answers

Top Parts