Model #JTP45BD1BB GE Built-In Oven, Electric

  • Control Panel & Cooktop
    3 Results
  • Upper Body
    3 Results
  • Center Spacer
    3 Results
  • Lower Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Replacing door hinge on 30" GE Monogram wall oven JTP45BD1BB Ge Built in oven

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the the instructions to replace the hinges on your oven.






You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
December 29, 2014
Q:

I have taken off a door to a ge monogram electric wall double oven.

A:

I'm sorry about the difficulties that you are experiencing with your oven door. I did some research at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. If you would like assistance from a qualified technician I have also attached a link to searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
January 01, 2011
A:

Thank you for the input. I too looked for a problem similar to mine, however, none of them had the spring disconnect from the hinge beyond the frame which houses the hinge. Again, I am assuming there IS a spring beyond the ovens' side trims. I just need to know how to retrieve and reconnect it without taking the oven out. A diagram of the hinge assembly/parts might be helpful, but haven't found one YET. Will keep looking.

Read More
jona -
January 01, 2011
A:

Without a model number for your GE Monogram wall oven, I am not able to see the exact type of oven door hinge system that it has. The first 3 images below show on type of system that is used on the GE Monogram ovens. This information may help you if you have this type of oven.

The 4th and 5th images show a hinge system on an older GE Monogram oven. The information in those images may help you if your oven has that type of hinge system.

If you need more help, reply with additional details and the full model number of your oven.

Read More
Lyle W -
Sears Technician
January 03, 2011
A:

Here are the 4th and 5th images.

Read More
Lyle W -
Sears Technician
January 03, 2011
A:

You can normally view the parts list diagram for your oven on the Sears PartsDirect.com website (see link below). The parts list diagram may also help you determine how to reinstall the oven door. Also, check your owner's manual for instructions on door removal and replacement. Some owner's manuals have that information. If you don't have your manual, you may be able to find it on our Manage My Life website using the owner's manual search tool. Click on the "Manuals" link at the top of this webpage to access that feature.

Read More
Lyle W -
Sears Technician
January 03, 2011
A:

Thank you for your input. Perhaps I am not making myself clear about the problem. The problem is NOT in the door side, but the frame side of the wall oven. Somewhere in that slot where the hinge protudes to join the door is where I am missing some sort of attactment device. Right now it just hangs freely, I said earlier that it sprang back HARD against the frame on the last tug to get the door free. I think it became UN attached from SOMETHING inside that slot, By the way the model is JKP47G and JKP48G 2 self cleaning wall ovens. It's the upper oven I am speaking of and it is about 20 years old. I am going over there to take pictures of it now and maybe get a better look at things. PS That last image #5 looks like the hinge we are discussing. Thanks again for your time and advice.

Read More
jona -
January 03, 2011
A:

Okay. Here are two pics of the hinge. The first one shows the part that should be in the slot with SOMETHING (maybe) attached (like a spring). The two flat rods just dangle on each side of the curved hook. It's hard to see inside that slot. Not sure what I am looking for, Hope this helps.

Read More
jona -
January 04, 2011
A:

Thanks for providing that model number. The parts diagram of the hinge assembly is shown in the first image below. This is the best diagram that I have of that hinge assembly. The second image shows a diagram of a hinge assembly that is likely similar to yours but not exact. I recommend that you pull the oven out of the cabinet and access the hinge assembly on the right side to see how the spring is attached on this oven. Once you determine how to attach the spring, you can access the hinge assembly on the left side and reattach the spring. It appears that the spring will attach to the base of the range at the back bottom corner of the unit. If the spring is broken, you can order a replacement from the Sears PartsDirect.com website (see link below).

Read More
Lyle W -
Sears Technician
January 04, 2011
A:

I have a similar situation with a GE JTP45BD1BB built in double over, something gave way in the spring and it will not let the door sit flush to the oven face. It will go up and down the rest of the way, it just won't sit flush so heat escapes & the light stays on. Is there any source of actual repair instructions? I'm not sure if I need to pull the oven out of the cabinet, or if I can remove some parts and access the hinge for replacement that way........??? Thanks

Read More
David -
December 01, 2012
See more answers

Top Parts