Model #JT952SF1SS GE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Upper Body
    3 Results
  • Center Spacer
    3 Results
  • Lower Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
  • Convection Fan
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

GE: JT952SF1SS door inner glass.

A:

When replacing a part on an appliance I know how useful it can be to have all of the needed parts to make sure the part replacement is done smoothly. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
July 23, 2011
A:

Thank you for your question and I understand your concern.

I did not see any mention of adhesive used in the service manual that I added below. I would not think any adhesive would be needed but if you must; use just a little of high temperature silicone and let it completely cure before turning the oven on.

Read More
Joey S -
Sears Technician
July 26, 2011
A:

Thanks guys. Appreciate the info. There is a requirement/recommendation to replace the 'foam tape' when replacing the inner door glass. The P/N for the 'foam tape' is #WB01T10055 and GE recommends a quantity of 4 when replacing the inner door glass.

Read More
John -
July 26, 2011
A:

John: Thanks for the good information. It was not mentioned in the manual.

Read More
Joey S -
Sears Technician
July 29, 2011
See more answers

Top Parts