Model #JMW9530DAS JENN-AIR Built-In Oven, Electric

  • Control Panel And Internal Controls
    3 Results
  • Body
    3 Results
  • Oven
    3 Results
  • Door
    3 Results
  • Microwave
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information (at Series 20)
    3 Results
Find part by diagram >

Question and Answers

Q:

Jenn-air JMC8130DDS microwave went dead after replacing door hinges on lower wall oven JMW9530DAS JMC8130DDS over a JMW9530DAS

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your microwave. I am so sorry it stopped working. I know what a time saver the microwave is and I am sure you want this issue fixed quickly. Changing the oven door hinges should not have affected the microwave. In this case I recommend you have the microwave serviced by a qualified technician. 
 
We do not give diagnostic or repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the power supply. Special equipment is needed to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after ANY/ALL microwave service. 
 
For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project. 
 
Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future. Thank you for choosing Sears.

Read More
Rachel Morgan -
Sears Technician
April 27, 2015
Q:

i have a jenn-air model jmw9530das in-wall oven. when i press the bake or broil function i get the message "this feature not available"

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
October 13, 2011
A:

The "Feature not available" error message indicates that the electronic oven control board detects a problem with that mode.

First thing to try is to enter the diagnostic test and see if the bake and broil functions will work. The image below will help you run the test. You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
October 16, 2011
See more answers

Top Parts