Model #JMP28GT1AD GE Drop-In Range, Electric

  • Cooktop
    3 Results
  • Oven
    3 Results
  • No Image Available
    3 Results
Find part by diagram >

Question and Answers

Q:

GE drop-in range control module replacement

A:

It is very important for you to have the proper instructions when wanting to replace the control module on your range so that you connect everything properly and you can go back to cooking a great meal and I will be happy to help you. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem: http://www.managemylife.com/mmh/questions/211104-how-do-i-replace-the-electronic-module-on-my-kenmore-oven. I hope my link is useful.

Read More
Joseph P. -
November 10, 2010
A:

The link seems to refer to an oven that has an upper rear panel. My oven is a drop-in with the panel located in the front. Thank you for your response.

Read More
RBH54 -
November 10, 2010
A:

To access the control in your range you have to remove the panel the control mounts in. Look on your parts diagram or go to www.partsdirect.com?sid=MMLxexpertxmerch to see a parts diagram to make it easier to follow these instructions.

Begin by disconnecting power to the range.

Open the oven door and remove the screws above the door opening that hold the end caps (item 2), the vent barrier (item 47), the vent trim (item 262A), and the trim I-brow (item 263). Remove these items from the range.

The control panel will then pull out from the bottom and down to release from the frame of the range.

The wires on the element switches and the control will limit how far you can move the control panel to access the screws that mount the oven control from the rear. Be careful not to pull the wires off when you are moving the control panel around.

Read More
Jimmy K -
Sears Technician
November 11, 2010
A:

Beautiful! Thanks, Jimmy! Already have the oven control in and the wife is baking dinner for the first time in two weeks! Thank you so much!

Read More
RBH54 -
November 11, 2010
See more answers

Top Parts