Model #JMC9158AAS JENN-AIR Built-In Microwave Oven

  • Control/door
    3 Results
  • Base/cavity
    3 Results
  • Interior Controls
    3 Results
  • Wiring Information
    3 Results
  • Supplemental Information
    3 Results
Find part by diagram >

Question and Answers

Q:

microwave base lamp installation JMC9158AAS Jenn-air Jenn-air micowave

A:

Thank you for choosing SearsPartsDirect. I know how much a time saver a microwave is and know you want to get it working quickly. In this case, I would suggest you have a qualified technician test or replace the unit.

Unfortunately, we cannot give advice on repairing or troubleshooting the microwave because they contain high voltage internal components that can retain lethal electrical charge even when the microwave is off. So for safety reasons I would recommend having this repair done by a qualified technician. You can schedule service at www.Searshomeservices.com

Thank you for your understanding on the situation. Have a great day.

Read More
Benny23 -
Sears Technician
July 24, 2015
Q:

How do I remove and install the membrane on my Jenn-air microwave?

A:

I added the instructions in the image below. NOTE: Disconnect the power cord from the power source before servicing. Do Not place you hands back into the cavity behind the control panel or touch any other components. Even with the microwave unplugged there is a capacitor inside that can store 10,000 volts which can cause serious injuries or it could be fatal.

Read More
Joey S -
Sears Technician
September 23, 2009