Model #JKP27BA2BB GE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body Parts
    3 Results
  • Upper Door
    3 Results
  • Lower Door
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


How do I disconnect the wires from the old bake element and connect them to the new one on my GE oven model JKP27BA2BB?


Make sure that you have the breaker shut off to disconnect electrical power when accessing this element. The wires should be connected to the old element with spade connectors that will just pull off of the old element. There may be a locking tab on the connector that needs to be released. If you cannot get the connectors off of the old element for some reason you can cut the wires and install new spade connectors that will fit your new element. You can normally find these types of spade connectors at your local hardware store.

Read More
Lyle W -
Sears Technician
December 16, 2009

Top Parts