Model #JJW8527AAB JENN-AIR Built-In Oven, Electric

  • Control Panel
    3 Results
  • Internal Controls
    3 Results
  • Body
    3 Results
  • Oven
    3 Results
  • Door
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

oven turns off and fan turns on JJW8527AAB Jenn-air Electric wall oven

A:

Update, the display doesn't light up either.

Read More
ScubaSteve62 -
January 03, 2015
A:

Thank you for choosing sears I would be happy to help you with your range. Upon researching model79629272000; it sounds like you may need to replace the control board. The oven is controlled by the control board, so when the control board begins to fail it can turn the oven off on its own and turn the fan on at random times. I have posted a link below of the control board.

I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
January 06, 2015
See more answers
Q:

jenn-air wall oven repair

A:

I understand that your Jenn-air wall ovens display is becoming very dim. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful.

Read More
Alina F. -
March 26, 2011
A:

Thank you for your question and I understand your concern.

Based on your symptom the electronic oven control/clock assembly will need to be replaced.

The oven control/clock assembly is part #71003424 which will cost approximately $201.71 and the service fee which includes the labor is approximately $130.00.

To access the oven control board:

  • Disconnect the oven from the power supply.
  • Open the door as wide as possible.
  • Remove the four screws along the bottom of control panel.
  • Grasp the control panel by placing both hands on the right and left sides of the panel, lift up and out to disengage the upper flange.
  • Slide the upper oven rack out and place the control panel on top of the oven rack. (Cover oven rack with a cloth to prevent scratching.)
  • Remove the screws securing the oven control board to remove.
  • Transfer one wire at a time from the old to the new control board.
  • Reverse the procedure to re-install and to re-assemble the control panel.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

You can view or down load the User's manual from Manage My Life .

Read More
Joey S -
Sears Technician
March 28, 2011
See more answers