Model #JGSP23WEV1WW GE Free Standing, Gas

  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door
    3 Results
  • Oven Burner Parts
    3 Results
  • Surface Burner Parts
    3 Results
  • Lock
    3 Results
Find part by diagram >

Question and Answers


replaced gas stove spark module and also electrodes - and still two front burners don't ignite.

A: is a great place to find the answers to just about anything, especially on appliances. I'm real sorry to hear that you are having some difficulties with your GE GasStove. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below.

Read More
James -
February 03, 2012

It is likely that you have a problem with those burner switches (part WB24T10071 -- shown in the third image below) or the wiring in that burner switch circuit. The first image below shows a wiring schematic for the range. That burner ignition circuit is traced in colors. The red and yellow portion represents the 2 rear burner switch circuits that are apparently okay. The portion traced in green represents the circuits through those front 2 burner switches that need to be checked. The second image shows the actual wiring diagram with harness connections. This information may help you check those burner switches and wiring. Be sure that you unplug the range before accessing internal components.

If you need parts, you can order them from the Sears PartsDirect website.

If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 06, 2012
See more answers

Top Parts