Model #JGRS14BEW6BB GE Wall Oven, Gas

  • Control Panel
    3 Results
  • Gas & Burner Parts
    3 Results
  • Body Parts
    3 Results
  • Door
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


For what reason would a wall oven igniter not come on? GE walll oven JGRS14BEW6BB


After having the gas turned back on after being off for a few days, why does my oven no longer heat up?


The oven not heating can be frustrating. I found some information for you that I am hoping will be able to help you out. Please click here:[Gas Oven Not Heating]. Your expert will also help answer your question. It may take two business days for your expert to reply. I do hope that everything works out.

Read More
Marc -
May 06, 2013

Thank you for your question and I understand your concern.

Turning the gas supply back on after the gas supply had been shut off for a few days should not have caused any failures unless, the gas pressure regulator had shut off due to turning the gas supply back on rapidly or too much gas pressure. The gas pressure regulator can shut the gas off if too much gas pressure entered the regulator too fast.

Assuming the gas pressure regulator is Okay and working, it could have a faulty oven glow bar igniter or it may be too weak to allow the oven safety valve to open.

Open the broiler drawer and then turn on the oven. Look towards the back of the burner assembly and you should find the glow bar igniter begin to glow red. The igniter must glow red to almost white hot before the oven safety valve will open. If find the igniter glowing and gas pressure regulator is open, the igniter is too weak to pull enough current/amperage to allow the oven safety valve to open. Replacing the glow bar oven igniter will most likely repair your oven.

NOTE: Disconnect or shut off the power supply to the oven before servicing. 

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

 If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

Read More
Joey S -
Sears Technician
May 08, 2013
See more answers