Model #JGRP17WEV1WW GE Wall Oven, Gas

  • Control Panel/cabinet Top
    3 Results
  • Door/lock
    3 Results
  • Body Side/insulation-body
    3 Results
  • Control Valve/burner Box-oven
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I GETTING A F3 ERROR ON MY BUILT- IN OVEN. SHOULD I REPLACE THE THERMOSTAT?

A:

The oven is great for making your favorite meals. Error codes can be a hassle sometimes. I did find some information for you that I am really hoping will help you out. I am adding the link below to help you with your question while you wait for your expert response. It may take 24-48 hours. I do hope that this will help you with the oven.

Read More
Marc H -
June 25, 2012
A:

I know that it is very frustrating to have issues with your oven. The F3 error code indicates a problem with the sensor circuit; this doesn't always mean that replacing the sensor will solve the problem. The harness to the sensor could be open or shorted. You will need to use a meter to check the sensor circuit wiring harness in order to come up with a final diagnosis. You will need to access the EOC electronic oven control & check the sensor circuit from there for a starting point. The value of the sensor should be 1090ohms + or - 5% @ 75 degrees. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
June 27, 2012
See more answers