Model #JDS8850AAQ JENN-AIR Slide-In Range, Electric/Gas

  • Top Assembly & Control
    3 Results
  • Body
    3 Results
  • Door/drawer
    3 Results
  • Gas Controls
    3 Results
  • Wiring Information
    3 Results
  • Oven/base
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacing clock w/har on Model JDS8850AAQ Jenn-Aire Jenn cook range

A:

Good afternoon.... I can appreciate your wanting to do the job yourself and save $. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your stove and have a nice day.

Read More
Henry -
February 18, 2013
A:

Thank you for your question and I understand your concern.

 Control Panel removal:

1. Remove power from unit.

2. Remove burner switch control knobs.

3. Open oven door and remove screws securing control panel.

4. Remove screws located on the right and left sides of the control panel.

5. Grasp control panel on the far left and right sides and gently pull the control panel out and down.

 Electronic Control removal:

1. Remove control panel, see "Control Panel" procedure, steps 1 through 5.

2. Remove screws securing electronic control bracket to control panel.

3. Label and disconnect terminal wiring from electronic control.

4. Reverse procedure to reinstall electronic control.

If there are any wire connection changes, the electronic oven control should come with specific wiring instructions. 

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
February 20, 2013
See more answers
Q:

Jenn-Aire gas/electric cook range repair

A:

Good afternoon.... I can appreciate your wanting to do the job yourself and save $. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your stove and have a nice day.

Read More
Henry -
February 18, 2013
A:

Thank you for your question and I understand your concern.

 Control Panel removal:

1. Remove power from unit.

2. Remove burner switch control knobs.

3. Open oven door and remove screws securing control panel.

4. Remove screws located on the right and left sides of the control panel.

5. Grasp control panel on the far left and right sides and gently pull the control panel out and down.

 Electronic Control removal:

1. Remove control panel, see "Control Panel" procedure, steps 1 through 5.

2. Remove screws securing electronic control bracket to control panel.

3. Label and disconnect terminal wiring from electronic control.

4. Reverse procedure to reinstall electronic control.

If there are any wire connection changes, the electronic oven control should come with specific wiring instructions. 

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
February 20, 2013
See more answers

Top Parts