Model #JBS07C2WW GE Free Standing, Electric

  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers


GE electric range #JBS07C2WW: Thanks for instructions to replace thermostat switch #wb20x5071 on this unit.


I'm sorry that you are having some difficulties with your G E Electric Range. I did some research for you at and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. Remember that your expert can walk you through a repair like this and even verify any required parts you may order to repair the Range. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to I hope these links will help until your expert can respond.

Read More
James -
August 30, 2011

I am showing that the oven thermostat switch for this model should be part WB20K10004. That WB20X5071 may work the same but it is not listed as the correct part for model JBS07C2WW. To replace that component, you will need to unplug the range and open the console as shown in the image below. Pull the knob off of the front of that thermostat and remove the screws on the front of the console. Transfer the wires to the new thermostat. Route the sensor into the oven in the same manner as the original sensor was installed. Reassemble the range and test it. Adjust the oven temperature as shown in that image below if necessary.

This information should help you with the installation of that thermostat. If you need more assistance, reply with additional details.

If you need to order part WB20K10004, you can get it from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 01, 2011
See more answers

Top Parts