Model #JBP30BA2 GE Free Standing, Electric

  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

control panel wiring JBP30BA2

A:

Installing the control board correctly is very important. I did some research on the model and part number but was not able to find installation instructions. Your expert will be able to help answer your question. It may take two business days. I do hope that everything works out.

Read More
Marc -
February 01, 2013
A:

You should have received a substitute control board that is part number WB27X10311. That substitute control board should look like the one shown in the first image below. The second image shows an instruction sheet that should have been supplied with that part. The third image shows a drawing of the original control board and the wiring diagram for the range. The wiring diagram is difficult to read but that is the best reproduction that I have for that document. That information should help you wire up that new control. Be sure that you unplug the range before accessing internal components and replacing parts.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician replace that control board, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 04, 2013
A:

Here are the images.

Read More
Lyle W -
Sears Technician
February 04, 2013
See more answers

Top Parts