Model #JBP26WY6 GE Ranges, Electric

  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers


Bottom Heating Element burned through on stove.


The bake element burning though and the other parts not working is very concerning. I did some research but was not able to find an answer for you. Your expert will be able to help give you a detailed answer. It may take 24-48 hours. I do hope that very thing with the stove works out.

Read More
Marc H -
July 10, 2012

Thank you for your question and I understand your concern.

When the bake element burnt out and shorted it could have tripped one of the two circuit breakers dedicated for the range preventing the broil element and surface elements from heating. Locate the two dedicated circuit breakers and flip them both OFF before removing and replacing the bake element. After replacing the bake element and resetting the circuit breakers, surface elements and broil element will most likely operate again providing the range is getting the proper voltage of 220 volts. Sometimes when an oven element shorts and burns out, it can also take out the electronic oven control board (bake relay on control) and the control board may need to be replaced if the oven control is not providing voltage to the bake elements.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
July 13, 2012
See more answers

Top Parts