Model #IMTL10253 IMAGE Treadmill

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers


I have an Image treadmill model MIL10253 or IMTL10253. lost the owner's manual. Is there one online?


We don't have an owners manual for your treadmill. You can buy an owners manual at the link below.

The E2 error is telling you the console is not receiving any information from the speed sensor. The speed sensor is located near the pulley on the front roller. The sensor should be located 1/8- 1/4 inch from the roller. It might be out of position.

You can disconnect the power to the treadmill from the wall and remove the hood at the front of the treadmill. Look at the small sensor near the front roller and check the position. If the sensor is positioned correctly, replace the sensor.

Check the continuity of the wires between the control board and the console. You might have a broken wire in the harness.

Read More
Jimmy K -
Sears Technician
April 02, 2009

Top Parts