Model #IKU58660 INGLIS Dishwasher

  • Frame And Console Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Tub Assembly Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Dishrack And Water Feed Parts
    3 Results
  • Lower Dishrack Parts
    3 Results
  • Miscellaneous Parts, Optional Parts
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

I have a Inglis dish washer 586 with digital controls.

A:

If the diagnostics don't work, then finding a fix to the washer problem can be problematic. While you are waiting on an expert to answer your question, I found a great link in the Manage My Life website on your problem. You can also set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray -
September 26, 2012
A:

You could have an intermittent problem with the control board or the key panel. The image below shows a diagnostic test cycle that can be used to check the control board and the major components in the dishwasher. I also included information on testing the control key panel. That information may help you determine the cause of your dishwasher failure.

Be sure that you shut off the house circuit breaker for the dishwasher to disconnect electrical power before accessing internal components.

You can order parts from this page if needed: Inglis Dishwasher Model IKU58660 Parts .

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services . NOTE: Keep in mind that the dishwasher will need to be in the failure mode for the technician to accurately diagnose and repair the unit.

Read More
Lyle W -
Sears Technician
September 28, 2012
See more answers

Top Parts