Model #HTS17GBSERWW HOTPOINT Top-Mount Refrigerator

  • Doors
    3 Results
  • Cabinet
    3 Results
  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers


How do I install Part #: WR60X10141 for a Hotpoint Refrigerator?


It is always a little frustrating when an appliance or tool starts acting up. I'm sorry to hear that you are having some difficulties with your Hotpoint Refrigerator's evaporator fan. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. I have attached the link below so you can check it out.

Read More
James -
February 28, 2012

Thank you for your question. Replacing some parts can be a challenge sometimes. The information you received from James is good. Even though the model is different the procedure will be basically the same. Everything in the freezer will need to be taken out, so the back panel (# 201 in picture) can be removed. Be sure to disconnect the power first. With the panel out, you will have complete access to the motor (# 610). The fan blade should pull off the motor shaft. Be sure to notice the position of the blade on the shaft, so you can put it back in the same position, on the new motor. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
February 29, 2012
See more answers

Top Parts