Model #HTM18GCSARSA HOTPOINT Top-Mount Refrigerator

  • Doors
    3 Results
  • Cabinet
    3 Results
  • Unit Parts
    3 Results
  • Ice Maker
    3 Results
Find part by diagram >

Question and Answers

Q:

Ongoing and PEAK wattage for my Hotpoint Refrigerator - so I know what size generator will operate it.

A:

The ManageMyLife website is a great place to find answers to questions that need qualified and insightful responses. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner. I did some research and found this expert answer that may help you. http://www.sears.com/lawn-garden-generators/c-1023265?sid=MMLxexpertxmerch Copy and paste this link to view some great generators.

Read More
James -
October 26, 2012
A:

Hi,

Thank you for your question, and I would like to answer the question this way.
I have some information for you, the average amps are 6.5 amps and triple that for start up. I recommend you give the refrigerator 20 amps for the refrigerator on the generator.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.
Thank you for using Manage My Life.

Read More
Bill__W -
Sears Technician
October 27, 2012
See more answers
Q:

my hotpoint refrigerator model # HTM18GCSARSA bottom frigde does not get clod but the top freezer part is getting cold need help single mom

A:

The refrigerator not getting cold can be very frustrating. I found some information for you that I am hoping will help you until your expert answers your question. I am adding the link below to help you with your question while you wait for your expert response. It may take 24-48 hours. I do hope that everything works out on the refrigerator.

Read More
Marc -
October 08, 2012
A:

Thank you for your question. I'm sorry you are having this problem with your refrigerator. The information you have received is very good. Now, if there is frost accumulating on the back wall and the fan is running, this will be a problem with the defrost system. It could be caused by a defective timer, heating element or bi-metal. A technician may need to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . In this case, you can move the food into a cooler and turn the unit off for 24 hours and leave the freezer door open. This will allow it time to thaw. When all the frost is gone, the unit will cool properly again for a few days until the frost builds back up. This will provide you a chance to have it checked. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
October 10, 2012
See more answers
Q:

Kenmore refrigerator (Model HTM18GCSARSA) not working after doors left open

A:

Having issues with your refrigerator can be very disappointing because this is where we store our foods. I researched your question and found a general answer posted by an expert that may help you diagnose the problem with your refrigerator. I have provided the link below. I hope this helps!

Read More
Jacqueline S -
September 10, 2010
A:

There aren't any fuses in the refrigerator. I think the refrigerator went into a defrost cycle while you were working. If the light is on inside the refrigerator you know you have power to it.

Defrost cycles usually last around 25 minutes. The refrigerator will probably start on its own if you leave it plugged in.

It is best to disconnect the power or turn the control to off when the doors will be open for more than 15 minutes. Frost builds on the evaporator coil when the door is open and the refrigerator might stop cooling until it goes through a defrost cycle after the door has been open.

Read More
Jimmy K -
Sears Technician
September 10, 2010
See more answers

Top Parts