Model #HAV2360AWW HOOVER Residential Washers

  • Control Panel
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
  • Transmission (series 22)
    3 Results
Find part by diagram >

Question and Answers

Q:

Do I just need a pump? HAV2360AWW Hoover Hoover laundry

Q:

Low water level - water level switch? HAV2360AWW Hoover Hoover laundry

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

How do I stop my agitator from floating up?

A:

Our clothes seem to pile up so fast during the winter. I'm sorry to hear that you are having some difficulties with your Maytag Washer. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices. I hope these links provided assist you.

Read More
James -
February 08, 2012
A:

James, Thanks but my agitator is very different: It has no tabs at the bottom.

Read More
Paul -
February 08, 2012
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is to have a problem with a washer. We are here to help. I looked at a part breakdown on your washer and it shows the agitator snaps on to the base then there is a retaining screw to keep it there. Then the fabric softener dispenser goes on top. So one of the following things has happened.

  1. The screw is missing as shown on the image below.
  2. The screw is not tighten to base which means the base needs to be replaced.
  3. Plastic inside the agitator broken so screw is doing nothing. That means the agitator would need to be replaced.
After you determine what is wrong you can use the link below to order parts.

To order parts please visit SearsPartsDirect.com with the model number.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com and click on the red Start now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
February 09, 2012
See more answers

Top Parts