Model #H-66 THERMADOR Range Hood

  • 3 Results
Find part by diagram >

Question and Answers

Q:

Need help on a Sears Kenmore ColdSpot fridge

A:

I can understand how easy it finally becomes to give up on a refrigerator that no longer works properly. The expert will review and respond with the information requested. If you would like to go ahead and browse some of the new models, I attached the link to Sears Home Services below. I hope you find the perfect refrigerator.

Read More
Barbara H. -
April 29, 2012
A:

Thank you for your question. It's nice to know the size of your fridge. This will be either a 10 or 20 cubic foot model. Most likely a 20 cubic foot. I�m listing a site you can access, that will show several models for you to chose from http://www.sears.com/appliances-refrigerators-top-freezer-refrigerators/s-1020313 . I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
May 01, 2012
A:

It is obvious from the answears here that there is NO Expert responding but are instead other coustomers / members , or sales persons etc --- but NOT ONE EXPERT! Look at the one that says it is either a 10 or 20 cu ft fridge > I gave the serial and model which should tell exactly what my old fridge is and can't possibly be a 10 cu ft . That and both just want me to browse the sears web site > which once again doesn't help if I don't know what to compare it to to start with . Kind of like comparing apples to oranges or banana's . I have size / space constraints .

Read More
Mike -
May 02, 2012
A:

Mike, I'm sorry for the confusion but only the model number will have the information for the size and it only reflects a 10 or 20 cubic foot. With this information it would be easy to determine if it's a 10 or 20 cubic foot. Since you know this will be a 20 cubic foot model and you have the dimensions, I listed the site to check several 20 cubic foot models, which have the dimensions listed and may give you some options that suit your needs the best. I did find a 21 cubic foot model (item # 04662152000) that has very similar dimensions as yours. I hope this helps you.

Read More
Scott D -
Sears Technician
May 03, 2012
See more answers
Q:

How to troubleshoot my icemaker?

A:

I'm sending you some troubleshooting instructions for this icemaker. To check resistance (ohms), the icemaker must be disconnected. When you make voltage checks, the icemaker has to remain connected or you will get false readings. If you had no voltage from L-N with the icemaker connected, it means there is no voltage getting to the icemaker. The problem in this case, could be with the optic boards. The flashing led light on the side wall, could be indicating an error code. I'm sending you a chart for the boards also. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
July 10, 2009