Model #GUH RHEEM Furnace/Heater, Gas

  • Model Number Notes
    3 Results
  • Replacement Parts 1-38
    3 Results
  • Replacement Parts 27-41
    3 Results
  • Replacement Parts 39-42
    3 Results
  • Replacement Parts 39-45b
    3 Results
Find part by diagram >

Question and Answers


deck deflector replacement 917.273373


Thanks for the inquiry and for being a valued member. 

I was able to find an image showing the torsion spring orientation within the bracket and deflector. You have to hold the deflector and spring in position then slide the hinge pin in. First, you have to remove the push nut on the end of the hinge pin. Usually you have to use a pair of diagonal cutters to cut the nut off. After you have the nut off note the position of the spring. In order to install the spring and hinge rod you will need to remove the hinge bracket from the mower deck. Removing the bracket will help remove tension from the spring so that you can position the spring on the deflector and then slide the hinge rod through the spring.

Image result for Craftsman tractor deflector shield installation

I hope this helps and thanks for using We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 27, 2015