Model #GU1100XTLQ1 WHIRLPOOL Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper Rack And Track Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Lower Rack Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a Whirlpool under the counter dishwasher model #GU1100XTLQ1 which was giving problems a month ago with the front panel lights blinking and not resetting.

A:

Good morning and very good question. Now that you're experiencing this issue again I will need to forward your situation to an expert. They should get back to you within two business days if not sooner. While you're waiting, check out the link I've provided below. It is an excellent description of the different kinds of flashing's and what they mean. I hope this link is helpful and have a nice day.

Read More
Henry -
November 02, 2012
A:

Thank you for your question and I understand your concern.

It would have helped knowing which lights are blinking and which cycles and options being selected.

Based on symptoms and the fact of already replacing the electronic control, I suspect the control is not detecting the door being opened/closed after a completed cycle or it has faulty console assembly w/active overlay.

Instead of disconnecting the main panel, try flipping the house circuit breaker off and on and then see if it will program and start. If it does, then one of the two door switches in not opening and breaking the circuit to control board when the door is opened and closed.

I added an image below of the technical data sheet. I also added an image for the procedure of checking the control panel buttons.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
November 03, 2012
See more answers
Q:

What could make my dishwasher run on it's own??

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
January 24, 2012
A:

I know that it can be very frustrating to have problems with the dishwasher. The flashing LED lights is an indicator that the key pad has a short circuit, or one of the buttons is stuck. This will cause your dishwasher to run on it's own. I would suggest that you replace the key pad. You can order the part from this link: Sears Parts Direct

If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
January 26, 2012
A:

Anne, thank you for your assistance. A shorted keypad console does make sense considering the symptoms my DW has; when it runs on it's own, only the 'sani-rinse' light is on. That is an option setting that never lit up before unless a main cycle selected first. When it stopped running & would not respond, pressing keys such as 'rinse only' & 'cancel' would only make those lights flash. When I installed a new control board (originally thought to be problem), different lights flashed; normal &cancel. I also could not reset the board by cutting/restoring power. That is why I reinstalled my original board. That unit would respond to a reset and allow me to drain the standing water at the bottom of the DW. I'm thinking about reusing my original board in a new button console and returning the replacement board. Could you advise me on this ??? Thank you !!!

Read More
Daniel -
January 25, 2012
See more answers

Top Parts