Model #GTR11AAPARWW GE Top-Mount Refrigerator

  • Doors
    3 Results
  • Cabinet
    3 Results
  • Unit Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Tried to reverse door swing, bur no holes in bottom of fridge GTR11AAPARWW

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your refrigerator and I do understand your frustration. Glad to help out. I'm looking at your model number gtr11aaparww and there will be holes that can be used for reversing the door swing. Keep in mind that you will need to remove the leveling leg from its place. Here is a link for the owner’s manual which contains this information beginning on page 9. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 28, 2014
Q:

Refrigerator G.E. model gtr11aaparww, how to install light switch?

A:

I'm sorry that you are having some difficulties with your GE Refrigerator's light switch. I did a little research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
May 18, 2011
A:

Sometimes replacing a part can be a little challenging. The information you have received from James is good but will not pertain to this problem. This should only be a 2 terminal switch. It will not matter which terminal the wires are connected to. They can be connected to either terminal. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
May 20, 2011
See more answers