Model #GSW9800PW1 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Controls And Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Miscellaneous Parts, Optional Part
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

whirlpool [gold] washer

A:

Thanks for the inquiry about your washer and removing the end caps for the console, I have attached one image show removal of end caps. Without a complete model number I cannot be sure this matches you model If not reply with a complete model number and I will be happy to respond. If you need parts here is a link to Sears Parts Direct. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.  

Read More
Ron H -
Sears Technician
September 25, 2013
A:

model #GSW9800PW1, I already have the new lid switch

Read More
Wayne -
September 25, 2013
A:

Thanks Wayne, there is a screw on back side on end covers , remove, lift console back to access cabinet clips . See the images I sent. Ron H.

Read More
Ron H -
Sears Technician
September 26, 2013
A:

Could you tell me what year model number gsw9800pw1 was made

Read More
Scott -
March 10, 2014
A:

Got my answer

Read More
Scott -
March 10, 2014
See more answers
Q:

Whirlpool [gold] washer

A:

Thank you for choosing ManageMyLife.com. I understand how frustrating it can be when the washer does not function correctly. Based on your symptoms, it sounds like the lid switch will need replacing as it is not making good contact with the lid. I have included instructions on the image below on how to access your lid switch for replacement. I have also included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
Lid Switch for Whirlpool Washer Model # GSW9800PW1
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you would like more assistance, reply to this thread and I will be glad to assist you further. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
September 19, 2013
A:

how do I REMOVE THE PLASTIC END COVERS TO ACCESS THE SCREWS

Read More
Wayne -
September 20, 2013
A:

how do I remove the plastic end covers to access the screws

Read More
Wayne -
September 20, 2013
A:

Welcome back to ManageMyLife.com, Wayne! The end caps normally do not need to be removed to access the lid switch. The mounting screws for the console is behind the end cap and is what needs to be removed to be able to tilt the console up.
If you have further questions please let me know. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
September 22, 2013
See more answers
Q:

Whirlpool [gold] washer

A:

Thank you for choosing ManageMyLife.com. I understand how frustrating it can be when the washer does not function correctly. Based on your symptoms, it sounds like the lid switch will need replacing as it is not making good contact with the lid. I have included instructions on the image below on how to access your lid switch for replacement. I have also included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
Lid Switch for Whirlpool Washer Model # GSW9800PW1
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you would like more assistance, reply to this thread and I will be glad to assist you further. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
September 19, 2013

Top Parts