Model #GST9675JQ1 WHIRLPOOL Residential Washers

  • Top And Cabinet/literature
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Why is the motor not running on my Whirlpool washer?


What you’re describing sounds like a bad timer. If the timer tries to send 120 volts to two windings at the same time, the motor will not start. If you have 120 volts on Or & BU at the motor at the same time, then the timer is bad. Be sure that you check the power supply to the washer while under a load. If the voltage drops below 110 volts, I recommend having the power supply checked. Only the correct rated capacitor should be used.

Read More
biker dave -
Sears Technician
May 18, 2009

Top Parts