Model #GSS25VGMDWW GE Side-by-Side Refrigerator

  • Door Kit
    3 Results
  • Sealed System & Mother Board
    3 Results
  • Replacement Parts List
    3 Results
  • Freezer Door
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Freezer Shelves
    3 Results
  • Ice Maker & Dispenser
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Shelves
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to remove part 339 from end of 350 to replace 345.

A:

The pin will screw on and off of the shaft. Taking apart and reassembling a crusher assembly can be a difficult job for a technician. You must be very careful and make certain you have each section marked, so you know exactly where each piece fits. Normally the best solution to repairing a crusher assembly is, to replace the complete assembly. The complete crusher assembly for this model is # WR17X11419 and is available at Sears ParsDirect . To take a crusher apart, I recommend having a technician do it.

Read More
Scott D -
Sears Technician
August 24, 2009
A:

Right know i can't afford a tech.That's why I am asking .The part I have is WR17X11705.So I would relly appreciate.Any in put so I don't screw it up.Just sayin

Read More
Cindie -
April 03, 2012
A:

Cindie, you will first need to remove the clip (# 321 in picture). With the clip removed you will be able to remove the crusher housing. With the housing removed, the auger nut (# 320) can then be removed and the auger and blades can be removed. As stated above, be very careful when removing the blades and washers and make sure each part is placed back in the exact same place. I hope this will help you.

Read More
Scott D -
Sears Technician
April 19, 2012
See more answers

Top Parts