Model #GSQ9310HQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

stops at drain cycle if I slam the door down it starts. #GSQ9310HQ0

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Whirlpool washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number GSQ9310HQ0. The issue seems to be with the lid switch. Over time the switch wears due to the opening and shutting of the lid. When the switch is damaged it won’t allow the washer to drain properly or spin. I would suggest replacing the switch to see if that solves the issue. the aprt number for the switch is 3949247.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 03, 2015
Q:

I noticed this part is broke when i look under the washer and it makes a rattling noise. What does this part do. GSQ9310HQ0 Whirlpool Automatic washer

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
The motor coupler is what allows the unit to spin. It takes the place of the drive belt in older units. The motor coupler connects the mechanical action of the motor to the transmission assembly. Without the motor coupler, your unit will fill with water, but it will never spin out, so your clothes will be soaking wet at the end of the cycle. 
For convenience, I have included a blue link below that you may click on to be directed to the SearsParts site to view and purchase the motor coupler when needed.

Motor Coupler for Model GSQ9310HQ0

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
April 08, 2014
Q:

I noticed this part is broke when i look under the washer and it makes a rattling noise. What does this part do. GSQ9310HQ0 Whirlpool Automatic washer

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
The motor coupler is what allows the unit to spin. It takes the place of the drive belt in older units. The motor coupler connects the mechanical action of the motor to the transmission assembly. Without the motor coupler, your unit will fill with water, but it will never spin out, so your clothes will be soaking wet at the end of the cycle. 
For convenience, I have included a blue link below that you may click on to be directed to the SearsParts site to view and purchase the motor coupler when needed.

Motor Coupler for Model GSQ9310HQ0

Hope this helps and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
April 08, 2014
Q:

Washer NOT draining

A:

I understand that your washer is not draining. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
July 31, 2012
A:

I can understand how difficult it is to wait for service. If you would like to manually drain the washer, you will need a bucket and towels. Pull the washer away from the wall (if possible), then remove the drain hose from the drain pipe. Place the hose into the bucket on the floor. The water will drain out as soon as it's bellow the controls. Once the bucket is full, replace the drain hose on the drain pipe, and dump the bucket into a sink or outside. You may have to do this several times until the washer is empty. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 31, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show