Model #GSD940G-01 GE Dishwasher

  • Control Panel
    3 Results
  • Motor-pump
    3 Results
  • Tub/front/control Panel
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


no water goes into dishwasher when dishwasher is turned on and motor is running GSD940G-01 Ge Ge dishwashers


Thank you for Choosing I defiantly understand the frustration with a dishwasher you can't use. I will be more then happy to assist you.

Looking at the information for the GE dishwasher model GSD940G-01 if no water is going into the dishwasher then you would need to change the inlet valve Click here.

The Inlet valve can be access from the bottom kick panel of the dishwasher. You do not need to remove it to do this repair. I have attached a few images of a similar model, although the water inlet valve will be in the same spot.

If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663

Hope this information has help you, any futher questions or concern please feel free to comment back. Thanks.

Read More
Samantha A -
Sears Technician
May 07, 2014

Thanks for earlier input. The GE customer service told me the water inlet value part number is WD21X802, instead of WD15X93 that was given to me by your agent. Which is the correct one for GSD940G dishwasher ? Also, does solenoid regulate water intake into dishwasher chamber ? If so, what is its part number ? Then, between water inlet value and solenoid, are both required for water inflow to chamber ? or, are they synonyms for the same function (ie., both terms are used interchangeably) ? If both are needed, please provide a diagram to show their locations and how to gain access to both of them ? Your advice will be appreciated.

Read More
May 08, 2014
See more answers