Model #GSD6660G03SS GE Dishwasher

  • Escutcheon & Door Assembly
    3 Results
  • Body Parts
    3 Results
  • Upper Rack Assembly
    3 Results
  • Lower Rack Assembly
    3 Results
  • Motor-pump Mechanism
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

GE dishwasher not starting

A:

I understand how important it is to have a Dishwasher that is working properly since dirty dishes do gather quickly. I have taken the time to research on the Manage My Life website and have found some information that you may find useful. while you are waiting for an expert to reply I have attached a link below.

Read More
Priscilla V -
April 11, 2011
A:

From the description you give I would suggest checking the door switches. The control will get power for lights and display even if the door switches are bad but nothing will run.

Remove the console and check the door switches to start and let me know what you find.

Read More
Fred M -
Sears Technician
April 12, 2011
See more answers
Q:

Conduit spray (part numberWD12X10052) question for dishwasher (model #GSD6660G03SS)

A:

I know how important it is to have all of the parts on your dishwasher installed properly so that your dishwasher will run efficiently. While you are waiting for an expert answer, I suggest you look in your owners manual for more troubleshooting tips. Below is a link in where you can enter your model number and the owners manual will pop up. I hope my link is useful.

Read More
Joseph P. -
January 13, 2011
A:

Thank you for your question and I understand your concern. The rubber funnel/knob on is part of the middle spray arm conduit (key#617). If it has come loose, the conduit will need to be replaced unless you have a way of securing the rubber piece onto the conduit.

The conduit should basically hang from the upper rack and when the rack is pushed in, the rubber funnel/knob will align with the middle spray arm water supply connection as shown in the images I added below. Rather than trying to describe how it should fit and mount, I added a couple of images below that will show how it fits.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 15, 2011
A:

Thank you both for your helpful tips. Can someone explain how the middle arm conduit hanges from the top rack. The pictures supplied in the last response dont who how the conduit arm attaches to part number 586 - the water supply connection

Read More
Kevin -
January 17, 2011
A:

Kevin: I'm sorry you are having troubles. Key #586 (docking cone) is fastened and fixed to main conduit key #585 with a screw. The conduit tube key#617 is suspended and connected at one end at the spray arm bracket and suspended on the other end from the bottom side of the back end of the upper rack using the CONDUIT CARRIER (KEY#621). The conduit carrier will clip to the bottom of the rack. The conduit will move with the upper rack and align with the docking cone key#586 that is fixed to the main conduit key#585. We do not have any other images other than the one I sent in a previous answer. The service manual says to look at the parts image for assembly. If you�re not able to figure it out, I recommend calling a service technician.

Read More
Joey S -
Sears Technician
January 18, 2011
See more answers

Top Parts