Model #GSD3660G00SS GE Dishwasher

  • Escutcheon & Door Assembly
    3 Results
  • Body Parts
    3 Results
  • Motor-pump Mechanism
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


dishwashwer starts to fill but drains same time GSD3660G00SS Ge Dishwasher


Thank you for your question and I understand your concern.

Based on your symptom, I suspect the drain solenoid plunger could be stuck inside the solenoid. You can access the drain solenoid be removing the front lower toe panel and access panel.  I added an image below of the pump and motor assembly. Key # 46 is the metal plunger that gets pulled down by the solenoid coil. When it's time to drain, the timer provides 120 volts to the solenoid. The metal plunger is pulled down which caused a drain flapper to open to allow the water to be pumped out through the drain hose. Check the plunger to see if it is stuck in the down position. If it's not stuck, check the spring and linkage connected to the plunger. NOTE: Disconnect power to the dishwasher before servicing.

Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
September 20, 2013

Top Parts