Model #GSD3200J00BB GE Dishwasher

  • Escutcheon & Door Assembly
    3 Results
  • Body Parts
    3 Results
  • Motor-pump Mechanism
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I replace a timer? GSD3200J00BB

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Dishwasher.

From the information you have provided above,  after researching on the issue. I have located some information that may help you in replacing the timer on your dishwasher. Click here.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
February 11, 2015
Q:

Burning Smell GSD3200J00BB Ge Dishwasher

A:

Thank you for choosing SearsPartsDirect.com. I will be more then happy to assist you. It sounds like a plastic utensil or something has fallen down onto the heating element & is melting & causing the burning smell you have. I do not see any alerts or recalls on this issue. Also sounds like the float on the water inlet valve has something stuck in it. If nothing there then then replace the water valve. Hope this information has help you. If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663. Any further questions or concerns. You will have to post a new question because at this time I can not reply to any comments. Again, Thank you for choosing SearsPartsDirect.com.
 

Read More
Samantha A -
Sears Technician
June 23, 2014
Q:

Dishwasher problem

A:

I'm sorry about the difficulties you continue to have with your dishwasher. While you are waiting for an expert to respond I was able to locate some great information that could possibly assist you with your issue. I have added the link below. Hope this helps!

Read More
Yadira B -
February 08, 2013
A:

A spray arm thay has a crack on the seams or a mineral build up in one of the spray holes may spray water in a way that might cause a leak such as you describe.   A poor drain might also cause such a problem.  You mention overfilling with water but a poor drain would also cause a higher water level than normal.  A build up of gunk along the bottom edge of the tub might cause such a leak.  You can view an image of this part at this link Gasket Insert.   These are some additional things to check out.  Make sure the leveling legs are on the floor supporting the tub.  You can reply with any additional details for further assistance. 

Read More
Fred M -
Sears Technician
February 09, 2013
See more answers

Top Parts