Model #GS6SHAXMS00 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Refrigerator door handle

A:

I am sorry that you are having some difficulties with the door handle on your refrigerator and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your refrigerator door handle troubles while you wait for your expert response.

Read More
Joseph P. -
November 12, 2012
A:

Hi,

Thank you for your question, and I would like to answer the question this way.
Depending on the style of handle you have, remove and check the screws that hold the handles on. I have given you a picture of both styles. Tighten the screws and reinstall and test the wobble of the handle.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.
Thank you for using Manage My Life.

Read More
Bill__W -
Sears Technician
November 13, 2012
See more answers
Q:

I own a whirlpool gold conquest the linefron the freezer side leading into the compressor if freezing when the fan is on and defrosting when its off

A:

The Refrigerator is one of the most important appliances in the home and by far a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a question that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
September 15, 2011
A:

Thank you for your question. I can understand your concern. When the refrigerant line to the compressor starts to freeze, it will usually indicate that either the small cap tube attached to it has come loose or it has an overcharge. I recommend having a technician check this to determine if the refrigerant line needs to have the cap tube reattached or if the system needs to be checked. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . The center wall should always be warm and sometimes it can get hot, which is normal. This is because one of the hot gas lines from the compressor runs behind the wall. As long as the compressor is running this line, which gets very hot, warms the wall to keep moisture from accumulating on it. This is an energy saver feature, to prevent the use of a heater. If you would like more assistance, reply to this thread and I will be glad to assist you further. Thank you for using Manage My life.

Read More
Scott D -
Sears Technician
September 19, 2011
See more answers
Q:

I own a whirlpool gold conguest the line going into the compressor is freezing model # GS6SHAXMS00

A:

I'm sorry to hear that you are having some difficulties with your Whirlpool Gold Refrigerator. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. The expert who will assist you, can walk you through a repair like this or let you know if this may be something a technician should perform. He can also verify parts that may be required for you to order. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided will assist you.

Read More
James -
September 14, 2011
A:

also the middle strip between doors is hot to touch not warm but hot

Read More
Rhonda -
September 14, 2011
A:

I read your post about the mullion between the doors being hot. If this strip is staying hot, you might have a stopped up condenser coil or a problem with the condenser fan motor next to the compressor.

I suggest you remove the grill under the doors and vacuum the dust from the condenser coil. You should also pull the refrigerator away from the wall and disconnect the power. With the power disconnected remove the cover on the rear of the compressor compartment and vacuum whatever dust is back there.

Connect the power to the refrigerator and see if the condenser fan motor is running.

After you get the condenser clean and the fan motor running normally, the frost on the compressor line should go away.

Read More
Jimmy K -
Sears Technician
September 17, 2011
See more answers

Top Parts