Model #GNL125N20A1 ICP Furnace/Heater, Gas

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Burners well not light GNL125N20A1 Icp Furnace

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you’re having with the burners not lighting. I know how frustrating that is to have happen.

This unit can be mounted in the horizontal position. The GNL at the start of the model designates this as a unit that can be mounted horizontally.

I have linked below some literature for the furnace to hopefully help you with the conversion and getting it running again. There could be a few reasons why the burners would go out after flashing. There could be a sensor issue, or a conversion issue. If the installation guide doesn’t help solve the issue, we would recommend having a service technician help assist with the diagnosis and repair.

Furnace Installation Guide

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
March 01, 2015
Q:

Burners well not light GNL125N20A1 Icp Furnace

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you’re having with the burners not lighting. I know how frustrating that is to have happen.

This unit can be mounted in the horizontal position. The GNL at the start of the model designates this as a unit that can be mounted horizontally.

I have linked below some literature for the furnace to hopefully help you with the conversion and getting it running again. There could be a few reasons why the burners would go out after flashing. There could be a sensor issue, or a conversion issue. If the installation guide doesn’t help solve the issue, we would recommend having a service technician help assist with the diagnosis and repair.

Furnace Installation Guide

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 01, 2015
Q:

Burners well not light GNL125N20A1 Icp Furnace

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you’re having with the burners not lighting. I know how frustrating that is to have happen.

This unit can be mounted in the horizontal position. The GNL at the start of the model designates this as a unit that can be mounted horizontally.

I have linked below some literature for the furnace to hopefully help you with the conversion and getting it running again. There could be a few reasons why the burners would go out after flashing. There could be a sensor issue, or a conversion issue. If the installation guide doesn’t help solve the issue, we would recommend having a service technician help assist with the diagnosis and repair.

Furnace Installation Guide

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 01, 2015