Model #GMC305PDS6 WHIRLPOOL Built-In Oven, Electric with Microwave

  • Oven/literature
    3 Results
  • Control Panel
    3 Results
  • Oven Door
    3 Results
  • Latch
    3 Results
  • Internal Oven
    3 Results
  • Cabinet And Stirrer
    3 Results
  • Microwave Compartment
    3 Results
  • Microwave Door
    3 Results
  • Top Venting/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Oven outer glass GMC305PDS6 Whirlpool Built-in oven, electric with microwave

A:

Thank you for choosing SearsPartsDirect. I know how much a time saver a microwave is and know you want to get it working quickly. In this case, I would suggest you have a qualified technician test and replace the unit.

Unfortunately, we cannot give advice on repairing the microwave because they contain high voltage internal components that can retain lethal electrical charge even when the microwave is off. So for safety reasons I would recommend having this repair done by a qualified technician. You can schedule service at www.Searshomeservices.com

Thank you for your understanding on the situation. Have a great day.

Read More
Benny23 -
Sears Technician
March 02, 2015
A:

Benny, it is the OVEN Door Glass... Not the microwave glass. The oven is on the bottom under the microwave.

Read More
Scott -
March 02, 2015
A:

I apologize for the misunderstanding. After taking a look into your model it seem like the glass comes as an assembly with the front door panel.  I have linked some information on how to replace this part.
Click here. 

The white panel w/ glass is part number 9759639. The black panel w/ glass is part number 9759641. And stainless panel w/ glass is 9759074.

Read More
Benny23 -
Sears Technician
March 02, 2015
See more answers
Q:

Control Panel for Built-in Oven Whirlpool Model GMC305PDS6

A:

I can understand your concern over wanting to know if it is necessary to discharge the capacitor before installing the control panel. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
January 17, 2013
A:

I can understand the need to have this information before replacing the control panel. I see this particular model is a oven/microwave combo and the control panel does double duty for both ovens. The tech sheets indicate after replacing the control panel a cavity program must be performed and a microwave power test. Unfortunately, because microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as operating on 1/2 power, can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.

Read More
Barbara H. -
Sears Technician
January 18, 2013
See more answers

Top Parts