Model #GMC275PDS6 WHIRLPOOL Built-In Oven, Electric with Microwave

  • Oven/literature
    3 Results
  • Control Panel
    3 Results
  • Oven Door
    3 Results
  • Latch
    3 Results
  • Internal Oven
    3 Results
  • Cabinet And Stirrer
    3 Results
  • Microwave Door
    3 Results
  • Microwave Compartment
    3 Results
  • Top Venting/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

i have combo microwave/oven whirlpool gmc275pds6-- need to know part ## of the two torsional springs and how to install them in the microwave door.

A:

Microwaves offer a lot of convenience. I found the part numbers for the springs. The left torsion spring part number is: 4452395 and the right torsion spring part number is: 4451008. The part must be installed the parts must be installed by a certified technician. Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as , can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future. Below is a link to get up service.

Read More
Marc H -
June 13, 2012
A:

Thank you for your question and I understand your concern.

I see that Marc provided the part numbers in the first response.

I am sorry, but we do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage, and a microwave shielding leakage test must be performed using a survey meter after any microwave service. That's why I strongly warn you to have this repair handled only by a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME.

Normally at ManageMyLife.com we like to help you with all of your repairs, but our expert advice is that microwaves are just too dangerous.

Read More
Joey S -
Sears Technician
June 15, 2012
See more answers

Top Parts