Model #GMC275PDB07 WHIRLPOOL Built-In Oven, Electric with Microwave

  • Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Oven Door Parts
    3 Results
  • Latch Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Cabinet And Stirrer Parts
    3 Results
  • Microwave Door Parts
    3 Results
  • Microwave Compartment Parts
    3 Results
  • Top Venting Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


oven microwave Door locks & goes into cleaning mode while cooking GMC275PDB07 Whirlpool Range microwave combo electric


I am having problem starting my accubake, whirlpool gold microwave. It is giving me door error


I know how important it is to have a good working microwave in the home so that you can reheat your meals very quickly. While you are waiting for an expert answer, I did manage to find a link that describes a similar problem to the one that you are having with your microwave. I hope my link is useful.

Read More
Joseph P. -
April 16, 2011

Thank you for your question.

I can understand wanting to be able to use your microwave oven.

I see that the lower regular oven and the microwave share once control panel.

Thank you for the picture of the control.

Are you sure it is the microwave that is giving you the door error.

I do not know of any microwave that will indicate a microwave door error.

It sounds more like the oven door lock system for the lower oven.

If you can open the oven door and push on the light switch and put the oven in a self-clean cycle for 30 seconds and cancel the cycle the door hook should come back to the non-self-clean position.

If that is not the problem I would suggest that you have a technician come out and check to see why the microwave is not working.

Microwaves are inherently dangerous to service. They contain high voltage internal component that can retain a lethal electrical charge even when the microwave is completely unplugged. A microwave shielding leakage test must be performed on the unit using proper testing equipment following any internal component access or repair before the microwave can safely be returned to service. These are the reasons why I recommend that you have a service technician repair this microwave failure.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 18, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show