Model #GLTF2940ES0 FRIGIDAIRE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Water leaks out of bottom drum housing - Frigidaire clothes washer GLTF2940ES0 Frigidaire Washer Water leaks out of the bottom of a plastic housing or shell wh GLTF2940ES0 Frigidaire Washer

Q:

washing error code GLTF2940ES0 Frigidaire Washer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you. 


1. Is the loading door closed?
 
No. Close the door.
Yes. Go the step (2).
 
Disconnect the plug from J2 on the control
board and check for continuity between the
pins in the plug.
Open. Check the door strike. If good, replace the
door switch assembly.
Closed. Replace the control board.
 
131763202 this is the door lock.

It sounds to me like door open, but in the manual it does not have that as an error code for this model. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 09, 2015
A:
Natasha12 -
Sears Technician
August 09, 2015
See more answers
Q:

e61 error code GLTF2940ES0 Frigidaire Washer

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Frigidaire washer model GLTF2940ES0. I am so sorry you are getting an error code. I will be happy to help you with this. I have included the image at the bottom of this post of the error codes for your washer. E61 is not listed. Is it possible you have misread the code? The closest code I could find would be EB1, which would be a power supply issue. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
February 09, 2015
A:
Rachel Morgan -
Sears Technician
February 09, 2015
See more answers

Top Parts