Model #GLHS36EEW5 FRIGIDAIRE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Ice & Water Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

glhs36eew5 control board

A:

I understand how it can be quite concerning when the refrigerator is leaking. While you are waiting for a detailed reply from an expert I recommend visiting the Sears Home Services website were you may have a technician diagnose and make repairs, an option is to visit Sears Home Services and use the handy scheduler. I have provided the link below. Hope this helps!

Read More
Priscilla V -
March 27, 2012
A:

Thank you for your question. I can understand your concern about the control board. If the fridge did work ok for awhile, after you dried the control out, it would indicate only the control board # 5303918341 will need to be replaced. It's available at http://www.searspartsdirect.com/partsdirect/part-number/5303918341/0046/253?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=5303918341&sid=MMLxexpertxmerch . I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
March 28, 2012
A:

Scott, Thank you. I already ordered the board from Sears and it should be here today. $185 with expedited shipping. Will install tonight. Brandon

Read More
Brandon -
March 28, 2012
A:

Installed new board and appears to be working. Had to replace wiring harness that came with board as well. Noticed that Fridge compartment only gets down to 43 F at coldest setting. Recommended is 36-40 F. Anything I can do about this other than get a new fridge? Freezer gets down to 0F no problem. Thanks, B

Read More
Brandon -
March 29, 2012
A:

Brandon, if the unit has not been running for at least 24 hours after the board has been installed, this could be normal. The fridge section will take longer to cool down then the freezer. If it has been on now for this amount of time and still won't cool below 43 degrees, it could be a sensor or air flow problem. Also make sure the light is turning off, when the door is closed. Make sure the sensor wires are connected properly on the new control. If it still won't cool properly, I recommend having a technician check this control. It can be a very complicated control to diagnose. You can call 1-800-469-4663 to schedule a tech to come out. I hope this will help you.

Read More
Scott D -
Sears Technician
March 30, 2012
See more answers

Top Parts