Model #GLGQ642AS4 FRIGIDAIRE Residential Dryer

  • Cabinet/drum
    3 Results
  • Front Panel/lint Filter
    3 Results
  • Controls/top Panel
    3 Results
  • Motor
    3 Results
  • Burner
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have the following Dryer: GSGQ642AS4. Dryer will not heat. I replaced the burner and the ignitor. Manual say's check fuses. Where are they located? GLGQ642AS4 Frigidaire Dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching GSGQ642AS4; there is a safety thermostat on the back panel. There is a radiant sensor on the side of the burner tube. I linked the diagrams below. The radiant sensor is number 79 on the burner diagram. The safety thermostat is number 33 on the cabinet/drum diagram.

If you have any further questions please re-post. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 03, 2014
A:

Thank you. I replaced the control module as recommended by a rep over the phone. The dryer still does not heat. The igniter is getting red/hot. I have power thru the safety t-stat, power to the radiant sensor on the side of the burner and power to the coils on the gas valve. Any thoughts?? I am thinking the coils are gone?? I have also replaced the burner and igniter already . Appreciate some insight. Thx

Read More
Tucker -
October 05, 2014
A:

Thank you. I replaced the control module as recommended by a rep over the phone. The dryer still does not heat. The igniter is getting red/hot. I have power thru the safety t-stat, power to the radiant sensor on the side of the burner and power to the coils on the gas valve. Any thoughts?? I am thinking the coils are gone?? I have also replaced the burner and igniter already . Appreciate some insight. Thx

Read More
Tucker -
October 08, 2014
A:

Thank you. I replaced the control module as recommended by a rep over the phone. The dryer still does not heat. The igniter is getting red/hot. I have power thru the safety t-stat, power to the radiant sensor on the side of the burner and power to the coils on the gas valve. Any thoughts?? I am thinking the coils are gone?? I have also replaced the burner and igniter already . Appreciate some insight. Thx

Read More
Tucker -
October 08, 2014
A:

Thank you. I replaced the control module as recommended by a rep over the phone. The dryer still does not heat. The igniter is getting red/hot. I have power thru the safety t-stat, power to the radiant sensor on the side of the burner and power to the coils on the gas valve. Any thoughts?? I am thinking the coils are gone?? I have also replaced the burner and igniter already . Appreciate some insight. Thx

Read More
Tucker -
October 08, 2014
See more answers
Q:

schematic or diagram for belt reinstall GLGQ642AS4 Frigidaire Dryer

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when needing to replace the belt on your dryer. I did look into the model number you have provided and I have found instructions that will assist you in your repair.

 

 

 

 

 

Click here to view more information. It won't be the same model number, but it is the same part number you are referring to. Let me know if this helps.

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
December 04, 2013

Top Parts