Model #GLEQ2152ES0 FRIGIDAIRE Residential Dryer

  • Cabinet/drum
    3 Results
  • Front Panel/lint Filter
    3 Results
  • Controls/top Panel
    3 Results
  • Motor
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer model GLEQ2152ELSO ERROR CODE GLEQ2152ES0 Frigidaire Dryer

Q:

Error E68 after 20 seconds whether dryer running or not. GLEQ2152ES0 Frigidaire Dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dryer displays an error code. 


If you replaced just the console and no the control board, then the control board will need to be replaced. 


134442500 is the console. 
134523200 is the control board. 

If you did replace the control board and are still receiving the error code I recommend having a service techncian diagnose the unit. 


Enter function test mode and perform key (button) test to determine which button is at fault. Carefully free the stuck button and perform the test again. If button is free but the key stuck code still exists, replace electronic control. 


FUNCTION TEST SEQUENCE 
1. Non-Digital Readout Display Models: Position the cycle selector knob to the 12 O’clock position. 
 Digital Readout Display Models: Position the cycle selector knob to the Normal cycle option. 
2. Press and hold the Select and Pause Cancel buttons simultaneously for six seconds. 
3. Immediately after, press and hold the START and Pause Cancel buttons simultaneously for 4 seconds. 
The control will enter test mode, the buzzer will sound 3 times and all LED’S will rapidly flash. 
 
After entering the test mode, the program knob can now be rotated to select the following tests: 
 
Rotate the program knob clockwise from the start position: 
1 turn: Drive motor runs; heat source is on. Drying LED is lit. “H” and the control thermistor reading will toggle back 
and forth in the display.** 
2 turns: Drive motor runs; heat source is off. Cool Down LED is lit and “AF” (Air Fluff) is displayed. 
3 turns: Drive motor runs; heat source is off. Drying and Cool Down LED’s are lit and numbers appear in the display 
showing moisture sensor readings. Opening the door (press in on door switch plunger) and placing a finger 
on the both moisture sense bars at the same time will make the numbers decrease. In controls that do not 
have a digit display, the MORE DRY LED should be ON. Opening the door (press in on door switch plunger) 
and placing a finger on the both moisture sense bars at the same time will make the DAMP LED come on. 
4 turns: Drive motor runs; heat source is off. 
Key test: 
a. When the TEMP button is pressed, all the TEMP LED’s should light. If the Temp selector is the 
rotary knob, and the knob is rotated, there should be a key beep with each setting. 
b. When the DRYNESS button is pressed, all the dryness level LED’s should light. 
c. When the OPTION or Select button is pressed, all the Option LED’s should light. 
d. When the START button is pressed, all the cycle status LED’s should light. 
e. When the Pause Cancel button is pressed, all the Cycle status LED’s should light. 
5 turns: Drive motor runs; heat source is off. Cool Down LED is lit. Control thermistor reading is displayed.** 
6 turns: Drive motor runs; heat source is on. Drying LED is lit. Control thermistor reading is displayed.*

To EXIT the test mode, press and hold the SELECT and Pause Cancel buttons simultaneously for six seconds or 
disconnect power from dryer. Dryer will be reset for regular operation.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 16, 2015
Q:

Dryer stops after 10 minutes GLEQ2152ES0 Frigidaire Dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model GLEQ2152ES0; it could be the unit is building up too much heat and the safety thermostat turns the heat off. I would recommend cleaning out any lint in the exhaust duct and inside the unit. Lint build up can restrict air flow and cause it to build up heat.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
December 01, 2014

Top Parts