Model #GLD5860P10SS GE Dishwasher

  • Escutcheon & Door Assembly
    3 Results
  • Body Parts
    3 Results
  • Upper Rack Assembly
    3 Results
  • Lower Rack Assembly
    3 Results
  • Motor-pump Mechanism
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My GLD5860P10SS lost power

A:

The dishwasher having no power can be concerning. I found some information for you that I am hoping will be able to help you. Please click here:[Dishwasher Has No Power]. Your expert will be able to help answer your question. It may take two business days for your expert to reply. I do hope that everything works out.

Read More
Marc -
May 06, 2013
A:

What I think I need most is a couple of ideas of what to look at. What points to put my voltmeter to in order to check different parts to see if they work. Any help out there? Thanks in advance, Elias

Read More
Elias -
May 07, 2013
A:

Thank you for your question.  I am sorry you are having a problem with your GE GLD586p10ss dishwasher

Caution: Before attempting any repair, turn the power to the dishwasher off first. 

If the house power is okay then I would suggest checking voltage to the main control.  There is a Black and White wire to the control which should have 120 volts all the time.

The diagram below may be helpful to you. 

Check the wire nuts that connect the house wiring to the dishwasher wire.  The wire nut can work loose over time and cause this type of problem. 

I hope this information is helpful.  You can reply below with any additional details for further assistance. 

You can also have the problem repaired in your home by a Sears technician.  Here is the link: Sears Home Services Dishwasher Repair.   

Read More
Fred M -
Sears Technician
May 08, 2013
See more answers
Q:

GE dishwasher help

A:

I understand that your GE dishwasher has no power to it. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
November 24, 2012
A:

This particular model doesn't have a thermal fuse and you'll notice in the wiring diagram below voltage to the control is not dependent upon the door switches. Even if the door switch is the problem the display should still have lights. If there is voltage to the control and there are no lights then I suspect the control is at fault. I hope this helps. Remember to turn the power off first.

Read More
Fred M -
Sears Technician
November 25, 2012
A:

Hi my GLD5860P10SS dishwasher has the same issue... but rather than mid-cycle, it just upped and drained its water and lights went out last evening without it even being used. Any help will be appreciated.

Read More
Elias -
May 06, 2013
A:

Elias, if the dishwaher came on by itself and drained the water out I suspect the control board is the problem. It there are no lights then either the control is bad or the voltage shut off. You can check voltage to the control on the Black and White wire if a meter is available. The WD21X10361 control is approximatel $169 dollars so checking voltage with a meter would be a good idea.

Read More
Fred M -
Sears Technician
May 08, 2013
A:

Hi Fred, thank you for your reply! I actually just opened up the kick plate and power supply box at the bottom, and as soon as I moved the hot wires just a touch, everything magically came back on. Appears there's a loose connection in there. So I plan to shut down the power, and double check the wiring. Saved myself some money and aggravation by checking the simple things first :). Again, I very much appreciate your reply!

Read More
Elias -
May 08, 2013
See more answers

Top Parts