Model #GLD5700N10BB GE Dishwasher

  • Escutcheon & Door Assembly
    3 Results
  • Body Parts
    3 Results
  • Upper Rack Assembly
    3 Results
  • Lower Rack Assembly
    3 Results
  • Motor-pump Mechanism
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to check if a GE dishwasher receives electricity?

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
aashe -
December 19, 2011
A:

The model # is "GLD5700N10BB". I have also submitted a couple of images.

Read More
farrokh -
December 19, 2011
A:

Thank you for your question and I understand your concern.

I would begin by removing the lower access panel and checking the voltage supply with the multimeter/voltage meter at the dishwasher electrical junction box. Flip the circuit breaker off dedicated for the dishwasher before removing the junction box cover. Remove the two wire nuts from the black and white wires. Flip the circuit breaker on and measure the voltage supply across the white and black power supply wires. NOTE: I do not recommend measuring voltage unless you have experience and feel safe and confident in doing so; otherwise I recommend calling a service technician to diagnose and repair your dishwasher.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
December 20, 2011
A:

Thanks for the feedbaqck. I did measure the voltage at the junction box. I did not get any reading. What would be next?

Read More
farrokh -
December 20, 2011
A:

Farrokh: Check inside your house breaker box for a tripped circuit breaker dedicated for the dishwasher electrical circuit. Reset the house breaker dedicated for the dishwasher circuit by flipping the breaker off and on 2-3 times and then see if the dishwasher is getting the proper voltage of 120 volts. You may need an electrician if you�re not able to get voltage to the dishwasher.

Read More
Joey S -
Sears Technician
December 21, 2011
See more answers
Q:

Why won't my GE dishwasher model #GLD5700N10BB fill with water

A:

The overfill switch could be the problem. Open the dishwasher door & lift the float up & down a couple of times. If the float is stuck up the unit will not fill. Remove any debris that may be blocking the float.

Make sure that the water valves to the dishwasher are turned on all the way. Look at the water lines to the dishwasher and remove any kinks.

Check the wiring harness to ensure it is still connected to the water valve. Other testing will require the use of a multi meter and electrical knowledge. If you need more help please resubmit your question with the results of your checks.

Read More
Jerome G. - Personal Solutions Manager -
Sears Technician
March 03, 2010

Top Parts