Model #GI7FVCXWY01 WHIRLPOOL Bottom-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Shelf Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I remove the drawers in the freezer? GI7FVCXWY01 GI7FVCXWY01

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your refrigerator. Upon researching model GI7FVCXWY01; I found information on removing the bins. It’s on page 12 of the manual. Click here for owner’s manual.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 18, 2015
Q:

Whirlpool refrigerator model GI7FVCXWY01 - parts installation

A:

I can understand your concern over wanting to know how to properly install these parts for your refrigerator. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
December 21, 2012
A:

Thanks. Any idea how to get the ice-maker cover off? I'm sure that's the first step, but I can't even figure how to do that!!!

Read More
David -
December 21, 2012
A:

Be sure that you unplug the refrigerator before beginning this repair. I provided a detailed procedure for removing the ice maker assembly from the refrigerator in the images below. That information should help you remove the ice maker assembly from the roof of that refrigerator compartment. Once you get the ice maker assembly out, you will need to remove the cover on that ice maker module (Key 12 in the parts image shown below). With that cover off, you can remove the screws that secure that module assembly part 626691 to the ice maker assembly. The last image shows the screws that you should need to remove circled in red. Once you remove that module, you can further disassemble the ice maker to access and replace the thermostat part 628397. That parts diagram should help you see how to access that thermostat.

I hope that this information helps. If you need more assistance, reply with additional details.

This is a fairly advanced repair. If you get to the point where you need to have a service technician replace those parts, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 24, 2012
A:

Here are additional images.

Read More
Lyle W -
Sears Technician
December 24, 2012
A:

Here are the final 2 images.

Read More
Lyle W -
Sears Technician
December 24, 2012
A:

Thank you very much, Lyle. Theses instructions look detailed enough. I appreciate your help. I really didn't want to tackle this, but the Sears technician that came out Saturday refused to do it. He said he only installs parts that he orders can't accept the liability for personal parts. I told him that although I did order them, they were from Sears, based on what the first Sears technician told me I needed. He didn't care and was rude. So...if that is Sears policy, I guess I have to tackle this.

Read More
David -
December 24, 2012
See more answers

Top Parts