Model #GI7FVCXWA00 WHIRLPOOL Bottom-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Shelf Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

No lights, icemaker or dispenser, and water after storm for Whirlpool GI7FVCXWA00

A:

For the door ajar issue on the Whirlpool refrigerator it is recommended to change the control board. Your might want to recheck the installation of the board for loose connection. I am providing a link to searshomeservices.com in case you may want to have a technician look at it. An expert will be with you with additional inforation on the issue you are having with the refrigerator. Thanks for your patience.

Read More
Anna T -
May 18, 2012
A:

There are two control boards on a diagram of parts for the unit. I replaced #5 on the diagram W10267646. The other board is #2 on the diagram and the part number is W10226427. I've looked all over and can't find a description of what operation or functions either board control themselves.

Read More
Brian -
May 18, 2012
A:

Thank you for your question. I'm sorry you're having this problem with your refrigerator. The other board # 2 in the picture is the power supply board. The board that controls the functions of the unit is the control board # W10267646 that you replaced. Normally this board will correct this problem. This is a complex model and I would strongly recommend having a technician check this. I'm attaching a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
May 21, 2012
A:

Could this problem be due to a deffective door switch?

Read More
David Clay -
February 16, 2013
A:

David, a defective door switch can keep the auger motor and light from working but it should not affect the water. Now, to check the switch, first disconnect the power and then pry the switch out. Now, disconnect the blk/rd and rd wires and connect them together and make sure they do not touch anything. Now reconnect the power and activate the dispenser. If it works now, the switch will need to be replaced. I hope this will help you.

Read More
Scott D -
Sears Technician
February 18, 2013
See more answers

Top Parts