Model #GGQ8831LL0 WHIRLPOOL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8318276 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer not working. need to troubleshoot repair or new one

A:

Diagnosing Dryers can be difficult. While you wait for the expert to review your model, you can check a similar question from a previous expert post if you like. I attached the link below. If you do decide to have a technician diagnose and make repairs, an option is to visit Sears Home Services and use the handy scheduler.

Read More
Priscilla V -
September 11, 2011
A:

Thank you for your question and I understand your concern.

Set the timer and press start and then listen to the push to start switch when opening the door. If you do not hear the push to start switch click when the door is opened then it could have a faulty timer, faulty door switch or there is no voltage supplied from the timer on the Blue wire.

First, confirm the wall outlet has power by plugging the washer into that specific receptacle. If the wall outlet is Okay, then I would suspect a faulty timer and this diagnoses is based on your details.

In order to diagnose the failure will require making some live voltage checks. If you have a volt/ohm meter and you feel confident in repairing your dryer reply as more details become available, and please reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
September 13, 2011
See more answers

Top Parts