Model #GGF334BHWD GIBSON Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

I am trying to confirm that the oven gas valve is working properly or just may need cleaning?

A:

I am sorry that you are having some difficulties with your oven. I suggest you add to the thread of this question and include the full model number of your range so that the expert can provide you with a more detailed answer. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
January 26, 2013
A:

its a Gibson model GGF334BHWD gas range.

Read More
Dan -
January 26, 2013
A:

You could have a problem with the thermostat or the gas ignition system. I recommend that you pull the bottom panel of the oven cavity out and see if the igniter glows when you set the oven in the bake mode. Here is a link for a video that explains the operation of that system in your oven: Gas Ignition Operation . If that igniter is glowing but the burner will not light, then your likely failure is in the glow bar igniter (part 316489402). If that igniter is not glowing, then you could have a failed thermostat, a bad igniter or a failed safety gas valve.

You can order parts from this page: Gibson Range Model GGF334BHWD Parts . Be sure that you unplug the range before accessing and replacing internal components.

These initial tips may help you fix that range problem. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 28, 2013
See more answers

Top Parts