Model #GEQ9800PB0 WHIRLPOOL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


dryer won't heat up


Before you call for service, on the Whirlpool dryer, let the expert help you. The link attached below has good information on dryers that won't heat. Hope this is helpful while waiting for additional information on your model.

Read More
Anna T -
October 03, 2012

Thank you for the question about your dryer not heating, I will be glad to assist with this. Based on your description of what you have already done I suggest a couple things. If you have a volt ohm meter I would recommend checking for 240 volts at terminal block of dryer.always disconnect power supply before servicing appliance and when testing live power be sure to wear safety equipment after determining that there is sufficient power then unplug and check for loose or broken wires around terminals and heating element. These are things you may be able to do before calling a technician. I hope this helps, should you need additional help reply with details.

Thanks Ron H.
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Ron H -
Sears Technician
October 04, 2012
See more answers

Top Parts